Aeroex Oil Mist Technology

Aeroex Mist Eliminators Features Cross Flow Design

The cross flow design provides optimum separation and oil drainage, which is more efficient than up-flow filter designs. The dirty air flows horizontally in stages 1 and 2 allowing the oil to drain downward. In up-flow design, the oil must drip directly into the air flow and even onto filters below.

The 1st stage innovative mechanical elements separates over 90% of the mist and solids. The fluid quickly drains out of the air flow, reducing evaporation and odors.

The 2nd stage agglomerator is an unique depth filter, layers of stainless steel wire mesh weaved with oil attracting fibers. Efficiency is high as the air travels though a bed of coarse and fine fibers at a low velocity. Channels between each layer provide exceptional fluid drainage. Optional is a On-Line Cleaning System for flushing out congealed coolant concentrate and fine solids. Alternatively, the media can be cleaned in placed with coolant or water hose. On most applications, cleaning is only every 2 years. The media is very durable, lasting up to 10 years.

The 3rd stage polishing filter or HEPA is a policing filter to capture sub-micron mist, smoke and bacteria. Typical life is 1 – 3 years.
 

"2010" - The new ROX  Same unique separation features in a compact energy efficient design. Reduced electrical consumption Reduced sound levels 4 sizes that meets most requirements Please go to "Aeroex Downloads" for specification sheets.